User manual

50 cm
2
360 cm
2
180 cm
2
120 cm
2
MANUFACTURER:
ELECTROLUX ITALIA S.p.A.
C.so Lino Zanussi, 30
33080 PORCIA (PN) - ITALIA
PRODUCT DESCRIPTION
Cooking surface layout
2
1
5
4
3
1 Semi-rapid burner
2 Semi-rapid burner
3 Control knobs
4 Auxiliary burner
5 Rapid burner
Control knobs
Symbol Description
no gas supply / off position
ignition position / maximum
gas supply
Symbol Description
minimum gas supply
OPERATION
Ignition of the burner
Warning! Be very careful when you
use open fire in kitchen environment.
Manufacturer decline any responsibility
in case misuse of the flame
Always light the burner before you put
cookware.
To light the burner:
1. Turn the control knob counterclockwise
to the maximum position (
) and
push it down.
2. Keep the control knob pushed for ap-
proximately 5 seconds; this will let ther-
mocouple to warm up. If not, the gas
supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are
in correct positions.
electrolux 7