user manual AUS ERFAHRUNG GUT GB Gas hob EHT 6432
electrolux
electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine.
electrolux Contents Instructions for the User Important Safety Information 5 Description of the Hob 7 Operation 8 Maintenance and Cleaning 10 Something Not Working? 12 Service and original spare parts 29 Standard Guarantee Conditions 30 European Guarantee 32 Instructions for the Installer Engineers Technical Data 13 Gas Connection 17 Conversion from Natural Gas to LPG 19 Electrical Connection 20 Wiring diagram 22 Possibilities for Insertion 27 Guide to Use the instructions The
electrolux 5 Important Safety Information These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance. It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
electrolux About Installation, Cleaning and Manteinance • • • • • • • • • • • It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations in force in the country where the appliance is used. Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen.
electrolux 7 Description of the Hob 1 3 3 5 6 7 8 4 2 1. 2. 3. 4. 5. 6. 7. 8. Hob Top Rapid Burner Semi-rapid Burner Auxiliary Burner Control knob for back right burner (semi-rapid) Control knob for back left burner (semi-rapid) Control knob for front left burner (rapid) Control knob for front right burner (auxiliary) INSTALLATION Any gas installation must be carried out by qualified personnel, and in accordance with existing rules and regulations.
electrolux Operation Hob Burners ) Toturnlightthea burner: relevant knob anticlockwise to z z maximum position and push down the knob to ignite. After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 2 - lett. D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted. Then, check the flame is regular and adjust it as required.
electrolux 9 Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a flat bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see the table beside).
electrolux Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine. The pan supports The pan supports can be removed to easily clean the hob. After cleaning the hob, make sure the pan supports are correctly positioned.
electrolux 11 Do not apply any cleaning agents to hot cooking zones. Ensure any residues are wiped off before the cooking zones are used again. If scratches or cracks are noticed, disconnect the appliance from the electrical supply to avoid the risk of electric shock and call your nearest Service Force Centre. Keep all objects and materials which can melt away from the cooking surface, e.g. plastics, aluminium foil. Care should be taken when preparing food or drinks containing sugar.
electrolux Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local Electrolux Service Force Centre. SYMPTOM There is no spark when lighting the gas. SOLUTION The gas ring burns unevenly. Check that the unit is plugged in and the electrical supply is switched on. Check that the general safety switch has not tripped (if fitted). Check the mains fuse has not blown.
electrolux 13 Instructions for the Installer Engineer technical data OVERALL DIMENSIONS Width: Depth: 580 mm 510 mm CUT OUT DIMENSIONS Width: Depth: Thickness 550 mm 470 mm 30 mm APPLIANCE CLASS 3 SUPPLY CONNECTIONS Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230 V ~ 50 Hz supply, 3 core flexible cable HEAT INPUT Rear Left Burner (semi rapid) Front Left Burner (rapid) Rear Right Burner (semi rapid) Front Right Burner (auxiliary) 1.9 kW 2.9 kW Natural gas 2.7 kW Liquid gas 1.
electrolux Table 2 : Injectors TYPE OF GAS NATURAL GAS LIQUID GAS BURNER INJECTORS NORMAL POWER REDUCED POWER NORMAL POWER 3 m /h g/h G30 1/100 mm kW kW Rapid Semi-rapid Auxiliary 119 96 70 2,9 1,9 1,0 0,75 0,45 0,33 0,276 0,181 0,09 Rapid Semi-rapid Auxiliary 86 71 50 2,7 1,9 1,0 0,75 0,45 0,33 - - FEEDING PRESSURE g/h G31 - 196 192 138 136 73 71 mbar 20 28-30 Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Re
electrolux 15 Location The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom or shower room. Before making the cut out in the worktop ensure that there is a minimum distance of 55 mm between the rear edge of the hob and the wall. A minimum distance of 100 mm must be left between the side edges of the hob and any adjacent cabinets or walls.
electrolux Instruction for the Installer z z z z The following instructions about installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force. The appliance must be electrically disconnected before all interventions. If any electric supply to the appliance is required to carry out the work, ensure all the necessary precautions are followed.
electrolux 17 Installation IMPORTANT This hob must be installed by a competent person to the relevant Gas Standards. Any gas installation must be carried out by a registered competent person. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored.
electrolux Commissioning When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below. the gas tap to the MAX position and ignite. ) 1)2) Turn Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below. Procedure: 1) Re-ignite the burner and set to MIN. ) 2) Remove the control knob.
electrolux 19 Conversion from Natural Gas to LPG IMPORTANT The replacement/conversion of the gas hob should only be undertaken by a competent person. It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted and the gas rate is adjusted to suit.
electrolux Electrical Connections ) Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS HOB MUST BE EARTHED.. The manufacturer declines any liability should these safety measures not be observed. This hob is designed to be connected to a 230 V 50 Hz AC electrical supply. Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate.
electrolux 21 The replacement of electric cable must be carried out exclusively by the service force centre or by personnel with similar competencies, in accordance with the current regulations.
electrolux Wiring diagram 1. TAPS IGNITOR SWITCHES 2.
electrolux 23 Fault Finding Blue Brown Preliminary Electrical Systems Check START Isolate appliance and carry out: A: Earth Continuity check. NO YES Blue Green Yellow Brown Carry out: D: Resistance to Earth check. Carry out: C: Polarity check. Has inlet fuse blown? NO Electricity supply should now be satisfactory. YES PLUG (with cover removed) Earth Wire Green/Yellow Neutral Wire Blue SOCKET (face view) ( ) E( ) FUSE Inlet wiring faulty. Rectify any fault.
electrolux A. EARTH CONTINUITY CHECK Appliance must be electrically disconnected - meter set on Ω (Ohms) x 1 scale and adjust zero if necessary. — Test leads from any appliance earth point to earth pin on plug. Resistance should be less than 0.1 Ω (Ohm), check all earth wires for continuity and all contacts are clean and tight. B. INSULATION CHECK Appliance electrically disconnected, all switches ON. a) meter set on Ω (Ohms) x 1 scale. Test leads from L to N in appliance terminal block.
electrolux 25 Ignition System / Gas Ignition Ignitor does not spark YES Check gas supply at burner NO Check plug top fuse and replace if necessary Light burner manually Check polarity and earth continuity of supply point Check by pass simmer adjusted Check earth continuity of appliance Check position of the electrode Check fitting of burners Check continuity from 'N' on the mains connector block and "O" on the ignitor unit Check continuity from the tip of each electrode to the terminals 1 to 4 o
electrolux Fitting the hob to the worktop Before fitting the hob into the cut out, an adhesive seal must be fitted to the underside outside edge of the hob. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. 1) Remove the pan supports, the burners caps and crowns and turn the hob upside down, taking care the ignition candles are not damaged in this operation. Fig.
electrolux 27 Possibilities for Insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 8. The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is needed. a) Removable panel b) Space possibly useful for connections Fig.
electrolux FO 0938 FO 0939 Fig. 10 Fig. 9 Cut Out Size 30 470 The dimensions of the cut-out are given in the diagram.
electrolux 29 Service and original spare parts This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention. For this reason we recommend that for any problem you contact the dealer who sold it to you, or our nearest authorized Service Centre, specifying the nature of the problem, the appliance model (Mod.
electrolux Standard Guarantee Conditions We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: •The appliance has been correctly installed and used only on the gas and electricity supply stated on the rating plate.
electrolux 31 •Products of Electrolux manufacturer that are not marketed by Electrolux. Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your postcode area.
electrolux European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
electrolux 33
www.electrolux.co.uk 35694-9401 04/07 R.