User manual

> 160 mm
5.2 FlexiBridge Standard mode
This mode is active when you activate
the hob. It connects the sections into two
separate cooking zones. The sides of the
zones which operate together in this
mode light up, and they are linked with
shorter illuminated lines. You can set the
heat setting for each zone separately.
Use two left side control bars.
Correct cookware position:
Incorrect cookware position:
5.3 FlexiBridge Big Bridge
mode
To activate the mode press until you
see the correct mode indicator
. This
mode connects three rear sections into
one cooking zone. The one front section
is not connected and operates as a
separate cooking zone. You can set the
heat setting for each zone separately. To
set the heat setting use the two control
bars on the left side. Use the right control
bar for the bigger zone and the left
control bar for the smaller zone.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller
than two sections the display shows
and after 2 minutes the zone switches
off.
ENGLISH 13