Manual

Installation
Leveling the Compactor
Your compactor has four adjustable levelers; (2) rollers in
the rear and (2) legs in the front. They allow you to adjust
for uneven floors and also trim the unit up to fit an under-
counter installation.
BACK OF /
COMPACTOR _/
_ 1 SLOTS
To level the back of the compactor:
Tip the back of compactor up and onto a wood block.
Loosen the adjustinq screws only far enough to move the
rollers to a higher or lower slot. Retighten the adjusting
screws and remove the wood block.
WOOD
FRONT OF
CO MPACTO R
LEVELING
LEGS
To level the front of the compactor:
Tip the front of compactor up and onto a wood block.
Turn the levelinq lecLS_in or out to the desired position.
Remove the wood block.