EN FREEZER / REFRIGERATOR FR RÉFRIGÉRATEUR / CONGÉLATEUR ES REFRIGERADOR CON CONGELADOR 242090205 March 2012 USE AND CARE GUIDE GUIDE D’UTILISATION ET D’ENTRETIEN GUIA DE USO Y CUIDADO
Finding Information Please read and save this guide Table of contents Thank you for choosing Electrolux, our new premium brand in home appliances. This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance. Finding Information....................................................2 Safety............................................................................3 Feature Overview..........................................
Safety Important safety instructions Safety Precautions Do not attempt to install or operate your unit until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a Danger, Warning, or Caution based on the risk type. Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Safety Electrical information WARNING You must follow these guidelines to ensure that your refrigerator’s safety mechanisms are operating correctly. • The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz, AC-only non-GFCI electric outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three-prong receptacle.
Feature Overview Understanding features and terms Your Electrolux refrigerator is designed for optimal convenience and storage flexibility. The illustration below is provided to assist you with familiarizing yourself with product features and terminology. NOTE *Features may vary according to model. Model is shown without freezer drawer cover.
Installation Required Tools You will need the following tools: This Use & Care Guide provides general installation and operating instructions for your model. We recommend using a service or kitchen contracting professional to install your refrigerator. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps. Location • Choose a place that is near a grounded, nonGFCI, electrical outlet.
Installation Leveling Freezer Drawer (if necessary) 1 Check gasket seal around top, bottom, and sides of freezer drawer. 2 If gasket is not sealed, open drawer and slightly loosen four (4) drawer screws (two (2) on each side) to allow drawer to rotate. To level the cabinet using the front rollers: 1 Slightly open freezer drawer. Lift the toe grille and gently pull forward (see illustration). 2 You can raise or lower each door. Use a ³⁄₈ inch socket wrench to turn the adjustment screws (1 per side).
Installation To adjust the door stop: 5 Retighten screw. Door stop is adjustable between 85 to 145 degrees. NOTE View shown is looking up at the bottom of the refrigerator door. Retighten Screw 6 Ensure door stops in desired location before resuming normal use. To level the doors using the adjustable lower hinge (select models): Adjustable Door Stop 1 Remove all food items from door bins on door being adjusted. 1 Open door to provide access to screw. 2 Open doors to 90 degrees. 2 Loosen screw.
Installation 4 Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counterclockwise (when viewed from the bottom). To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Adjusting Flipper Mullion Screw Raising/Lowering Door 5 Retighten the screw (where applicable), ensuring it is between the spokes of the washer.
Removing the Doors Getting through narrow spaces If your refrigerator will not fit through an entrance area, you can remove the doors. Check first by measuring the entrance. To remove the refrigerator doors: 1 Trace lightly around the door’s top hinges with a pencil. This makes reinstallation easier. To prepare for removing the doors: 1 Make sure the electrical power cord is unplugged from the wall outlet. 2 Open the freezer drawer and remove the toe grille (see “Installation” section).
Removing the Doors 11 Installing Freezer Drawer NOTE You will be pulling approximately five (5) feet of water tube from the back of the refrigerator. 1 With lower slides pulled out, hang drawer onto slide brackets ensuring pins on each side are fully inserted into slots on each side. 4 Unscrew the three (3) lower hinge screws and hinge if necessary. To reinstall the right door, reverse the above steps.
Installing Door Handles Door Handle Mounting Instructions 1 Remove handles from protective packaging. 2 Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (C) with supplied Allen wrench. 4 Repeat steps 2 and 3 to install opposite handle.
Connecting the Water Supply 13 WARNING To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator. CAUTION To Avoid Property Damage: • Copper or Stainless Steel braided tubing is recommended for the water supply line. Water supply tubing made of ¼ inch plastic is not recommended to be used.
Controls Wave-Touch TM IQ-Touch TM
Controls 15 Wave-TouchTM (select models) Your refrigerator is equipped with a Wave-TouchTM control panel display. It is only necessary to gently touch the glass. There are three (3) levels of display. 1st Level: Sleep Mode IMPORTANT When the ice maker is turned off, the ice in the bucket should be transferred to the freezer or discarded to prevent it from melting. 3rd Level: User Variable Options Sleep Mode displays only the WATER, CUBES and CRUSHED options.
Controls Setting cooling temperatures 1 Touch the glass panel to illuminate the 2 level of display. nd 2 Select the options icon. Plus (+) and minus (-) indicators will appear on either side of the displayed temperatures. Wave-TouchTM/IQ-TouchTM “Sabbath Mode” The Sabbath Mode is a feature that disables portions of the refrigerator and its controls for both Wave-TouchTM and IQ-TouchTM, in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community.
Controls 17 IQ-TouchTM (select models) NOTE Although you have entered the Sabbath Mode, the ice maker will complete the cycle it had already initiated. The ice cube compartment will remain cold and new ice cubes can be made with standard trays. Sabbath Mode and the Perfect TempTM Drawer The Perfect TempTM Drawer should be turned off for the Sabbath/Holidays. Before putting the refrigerator into the Sabbath mode, turn the Perfect TempTM Drawer off by pressing the drawer on/off button.
Controls temp display Touch to toggle the freezer and fridge temp display on and off. Alarms Touch and hold temp display to toggle display from Fahrenheit to Celsius. mute sounds Tones emitted by each key press can be turned off based on user preference. The sounds are muted when the red indicator is lit. Warning signals will stay active. factory default Resets all refrigerator settings such as temp, temp display and ring tones to their factory default settings.
Automatic Ice & Water Maker/Dispenser 19 Priming the water supply system CAUTION For proper dispenser operation, recommended water supply pressure should fall between 30 psi and 100 psi. Excessive pressure may cause water filter to malfunction. 1 Begin filling the tank by pressing and holding a drinking glass against the water dispenser paddle. 2 Keep the glass in this position until water comes out of the dispenser. It may take about 1½ minutes.
Automatic Ice & Water Maker/Dispenser Ice maker/dispenser tips • If your refrigerator is not connected to a water supply or the water supply is turned off, turn off the ice maker by holding the On/Off soft-touch icon for three (3) seconds.
Automatic Ice Maker - Freezer 21 Ice maker operation & care (select models) After the refrigerator is installed properly, the ice maker can produce ice within 24 hours. It can completely fill an ice bin in about three (3) days. When using the ice maker for the first time and in order for the ice maker to work properly, it is necessary to clear air from water filter tubing. Once ice maker begins making ice, allow the bucket to fill completely, then discard the first TWO (2) FULL buckets of ice.
Storage Features CAUTION To avoid injury from breakage, handle tempered glass shelves carefully. Sudden temperature changes can cause glass breakage. NOTE Drawers Your refrigerator includes a variety of storage drawers. These drawers are located in fixed positions at the bottom of the fresh food compartment. Crispers Crisper drawers are designed for storing fruits, vegetables, and other fresh produce. Features may vary according to model.
Storage Features 23 To remove the Crisper Drawer for cleaning: 1 Pull the drawer out until it stops. 2 Lift the front slightly and remove the drawer. Cool Zone Drawer (select models) Removing Crisper Drawer Special items rack (select models) The innovative design of the special items rack allows you to store four (4) bottles of wine or soft drink bottles. Some models are equipped with a meat keeper drawer for short-term storage of bulk meat items.
Storage Features IMPORTANT DO NOT clean the display area of the Perfect TempTM Drawer with abrasive or caustic cleaners. Wipe clean with a moist sponge. CAUTION To change the position of an adjustable door bin: 1 Remove all food from bin. 2 Grip the bin firmly with both hands and lift it upward. 3 Remove the bin. 4 Place the bin just above desired position. 5 Lower the bin onto supports until locked in place.
Storage Features 25 Dairy compartment Use the dairy compartment, at the top of the fresh food compartment door, for short-term storage of cheese, spreads, or butter. The dairy compartment is designed to be warmer than the open area and includes a lift-up cover that may be locked and a dairy divider (select models). To reinstall upper and middle baskets (select models), position basket onto the retainer clips making sure the front of the basket rests in the retainer clips on the stabilizer bar.
Storage Features Dividers Removal Lift up on the front of the middle divider and pull out. Middle Basket Divider Lift up on the rear of the lower divider and pull out. Lower Basket Divider & Spill Guard Tray To reposition the pivoting divider (some models), lift up and slide to desired location. The pivoting divider is not designed to be removed . Spill Guard Tray Lower Basket Pivoting Divider Lower Basket Pivoting Divider (some models) NOTE Spill Guard Tray should be hand washed in warm water.
Storing Food and Saving Energy 27 Ideas for storing foods Fresh food storage • Leave a space between packages, so cold air can circulate freely, allowing food to freeze as quickly as possible. • Keep the fresh food compartment between 34° F and 40° F with an optimum temperature of 37° F. Ideas for saving energy • Avoid overcrowding the refrigerator shelves, which reduces air circulation and causes uneven cooling.
Normal Operating Sounds Understanding the sounds you may hear Your new, high-efficiency refrigerator may introduce unfamiliar sounds. These sounds normally indicate your refrigerator is operating correctly. Some surfaces on floors, walls, and kitchen cabinets may make these sounds more noticeable. The following is a list of major components in your refrigerator and the sounds they can cause: A Evaporator Refrigerant through the evaporator may create a boiling or gurgling sound.
Changing The Water and Air Filters 29 Your refrigerator is equipped with separate water and air filtering systems. The water filter system filters all dispensed drinking water, as well as the water used to produce ice. The air filter removes odors and impurities from the refrigerator compartment. NOTE The control panel includes controls to monitor the status of your water and air filters. See the Controls section for more information.
Changing The Water and Air Filters Air filter The air filter is located under the utility bin and/or on the inside of the left door above the ice maker chute. Replacing your PureAdvantageTM air filter To ensure optimal filtering of refrigerator odors, you should change the air filter every six (6) months (the filter status light on the Touch Panel prompts you to replace the filter after six (6) months). 1 Open the air filter door. 2 Remove the old filter and discard it.
Care and Cleaning 31 Protecting your investment Keeping your refrigerator clean maintains its appearance and prevents odor build-up. Wipe up any spills immediately and clean the freezer and fresh food compartments at least twice a year. NOTE Do not use abrasive cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches, or cleansers containing petroleum products on plastic parts, interior doors, gaskets, or cabinet liners.
Care and Cleaning Care and cleaning tips Part Interior & Door Liners Door Gaskets Drawers & Bins Glass Shelves Toe Grille Exterior & Handles Exterior & Handles (Stainless Steel Models Only) Cleaning Agents • Soap and water • Baking soda and water • Soap and water • Soap and water • Soap and water • Glass cleaner • Mild liquid sprays • Soap and water • Mild liquid sprays • Vacuum • Soap and water • Non abrasive glass cleaner • Soap and water • Stainless steel cleaners Tips and Precautions • Use two
Care and Cleaning 33 Replacing LED Lights (select models) Both the freezer and fresh food compartments of your refrigerator include LED lights. Always use Electrolux parts for replacement. To replace LED Lights: CAUTION Wear gloves when replacing incandescent light bulbs to avoid getting cut. To replace light bulbs: 1 Unplug your refrigerator’s power cord. 1 Unplug your refrigerator’s power cord. 2 Remove light cover by pushing up and out. 2 Wear protective gloves.
Solutions to Common Problems Before you call... If you experience a problem with your refrigerator or notice a product behavior or condition that you do not understand, you can usually avoid a call to your service representative by referring to this section for an answer. Beginning with the following table, this information includes common concerns, causes, and suggested solutions. Automatic Ice Maker Concern Potential Cause Common Solution Ice maker is not making any ice. • Ice maker is turned off.
Solutions to Common Problems 35 Dispenser (Ice & Water--continued) Concern Potential Cause Common Solution Ice dispenser is jammed. • Ice has melted and frozen around auger due to infrequent use, temperature fluctuations, and/or power outages. • Ice cubes are frozen together. • Ice cubes are smaller than normal. • Remove ice bin, thaw, and empty the contents. Clean bin, wipe dry, and replace in proper position. When new ice is made, dispenser should operate.
Solutions to Common Problems Running Your Refrigerator Concern Potential Cause Common Solution Compressor does not run. • Cooling system is turned Off. • Turn cooling system On. See Controls Section for location of cooling system On/Off button. • This is normal for a fully automatic defrost refrigerator. The defrost cycle occurs periodically, lasting about 30 minutes. • Ensure plug is tightly pushed into outlet. • Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.
Solutions to Common Problems 37 Temperatures Are Too Warm Concern Potential Cause Common Solution Freezer/ Refrigerator temperature is too warm. • Doors are opened too frequently or too long. • Door is slightly open. • Warm air enters the refrigerator whenever the door is opened. Open the door less often. • See Problem section, Opening/Closing of Doors/Drawers. Freezer temperature is too warm. Refrigerator temperature is satisfactory. • Freezer control is set too warm.
Warranty Major Appliance Warranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.
