Service manual

EElleeccttrroonniicc CCoonnttrrooll
3-5
CCoonnttrrooll PPaanneell ((UUsseerr IInntteerrffaaccee LLaayyoouutt)) IIQQ--TToouucchh™™
SSeelleeccttiinngg tthhee AApppprroopprriiaattee CCyyccllee aanndd SSeettttiinnggss OOvveerrvviieeww
Turn the cycle selector knob in either direction to select the cycle desired. The indicator for that cycle will
be illuminated.
A suitable drying temperature, dryness level and options will automatically be indicated for the cycle
selected.
To change settings, press the temperature, dryness and options buttons to scroll to the desired settings.
To select or delete an option, press the button for that option. The indicator will light when the option has
been selected. It will no longer be lighted when the option has been deleted.
Adjustments to a cycle will be remembered and recalled each time that cycle is selected in the future.
To return to factory settings, press the temperature and dryness buttons at the same time and hold for 5
seconds.
Demo Mode
Demo Mode will standby for 10 minutes then perform an LED on/off sequence for 3 minutes. During the
standby sequence the drum light and start button will be activated. The controls will be fully functional
during Demo Mode with abbreviated cycles lasting about 1 minute. Some features will be deactivated
during Demo Mode for safety purposes. When the units are in Demo Mode the text “DEMO MODE” will
be displayed in the LCD screen. Demo mode will be saved if the units are unplugged or if there is a
power outage. To deactivate Demo Mode repeat steps 1-3 below.
1. Turn the cycle selector knob to TIME DRY cycle, press the START button then the CANCEL button.
2. Activate the controls by turning the cycle selector knob and turn to TIME DRY cycle.
3. Press and hold CANCEL button and CTRL LOCK button for 3 seconds
4. DEMO MODE instructions have to be completed by 7 seconds of the control activation.
5. Press the CANCEL button to begin DEMO MODE.
6. To deactivate DEMO MODE repeat steps 1 – 3.
FFiigguurree 33--22.. IIQQ--TToouucchh™™ CCoonnttrrooll PPaanneell
Dryness Scroll
Temperature Scroll Options
User Interface
Display
Cycle Selector