Service manual

EElleeccttrroonniicc CCoonnttrrooll
3-7
CCyyccllee SSeelleeccttiioonn
Turn the cycle selector in either direction to the
cycle desired. The icon for that cycle will be
illuminated. Press on the cycle selector knob to
extend it or return it flush to the console.
To change the selection after the cycle begins,
press cancel before making another choice. Just
turning the cycle selector knob to another
selection will not change the cycle.
AAuuttoo DDrryy CCyycclleess
Moisture sensing bars at the back of the dryer
drum sense the moisture level of the load as it
tumbles through the heated air. With Auto Dry
cycles, the load will automatically be dried at the
selected temperature to the desired dryness level.
When the load has reached the selected dryness
level, it will continue to tumble, unheated, during a
cool down period.
Drying time varies depending on size and
dampness of load and fabric type. If the load is too
small or almost dry, the moisture sensing bars may
not detect enough moisture to continue the cycle
and the cycle may end after a few minutes. If this
occurs, then select the time dry cycle to dry such
loads.
NNoorrmmaall
Select this cycle to dry everyday fabrics including
cottons and sheets with high temp, med high temp
or medium temp heat. All dryness levels except
maximum dry and all options including sanitize are
available with this Auto Dry cycle. If equipped with
Perfect Steam™, the add steam option is also
available with this cycle.
TToowweellss
Select this cycle to dry heavy loads such as towels
and bath mats with maximum temp, high temp or
med high temp heat. The maximum dry, more dry
and normal dry dryness levels and the gentle
tumble and sanitize options are available with this
Auto Dry cycle.
NOTE
TThhee ffoolllloowwiinngg ccyyccllee ddeessccrriippttiioonnss aarree ffoorr tthhee
WWaavvee TToouucchh aanndd IIQQ TToouucchh DDrryyeerrss..
TThhee IIQQ TToouucchh mmooddeellss ddoo nnoott ffeeaattuurree tthhee
SStteeaamm ooppttiioonn aanndd tthhee aaccttiivvee wweeaarr pprreesseett..