Service manual

EElleeccttrroonniicc CCoonnttrrooll
3-11
OOppttiioonnss
Suitable options will automatically be indicated
when the cycle is selected.
To add options, press the corresponding options
buttons to illuminate the selections desired. To
delete options, press the options buttons again
and the indicator lights will turn off. Not all options
are available with every cycle. The indicator will not
light if the option is not available with that Cycle.
All options selected for the cycle, except sanitize,
will be remembered and recalled each time that
cycle is selected in the future. To prevent
unintentional and accidental exposure of delicate
material to sanitize heat, the sanitize option will not
be remembered and must be reselected each time.
AAdddd SStteeaamm
(steam models only)
The add steam option injects steam into the
clothing prior to cool down to reduce wrinkling,
ironing and static cling.
EExxtteennddeedd TTuummbbllee
Select the extended tumble option if the dried load
might not be removed promptly at the end of
the cycle. The dry load will tumble continuously
without heat for 30 minutes. “
EExxtt.. TTuummbbllee
” will be
displayed and a chime will sound every 5 minutes
to remind you to remove the dried load. The
wrinkle release option can be selected with
extended tumble to increase the amount of time
the load will tumble without heat.
WWrriinnkkllee RReelleeaassee ((IIQQ TToouucchh))
Select the wrinkle release option if the dried
load might not be removed promptly at the end of
the cycle. To help prevent wrinkles, the dry load
will intermittently tumble for a total of 45 minutes.
“
WWrriinnkkllee RReell..
” will be displayed and a chime will
sound every 5 minutes to remind you to remove
the dried load.
The extended tumble option can be selected
with wrinkle release to add another 30 minutes of
tumbling without heat.
WW
rriinnkkllee RReelleeaassee ((WWaavvee TToouucchh))
The wrinkle release option helps prevent wrinkles
and tangling by alternately tumbling the load with-
out heat for 5 minutes in a clockwise direction,
then 5 minutes in a counterclockwise direction, for
a total of 45 minutes. A signal will sound every 5
minutes to remind you to remove the dry load at
any time.
Add steam option available on Steam Model only.