Instruction manual R EFR ES HMENT C ENT ER Built-in appliance
welcome to the world of Electrolux electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine.
electrolux contents Contents Built-in appliance............................. Electrical safety............................... Appliance description ........................ Identification plate........................... Technical Characteristics.................... Installation..................................... 1 5 7 8 8 9 Package content ...................................9 1 Unit positioning................................ 10 2 Frontal spacer installation...................
electrical safety electrolux 5 Electrical safety This appliance conforms to the following safety electrical European Directives: This manual has been written for your own safety and of others. Please read manual carefully before installation and/or use. Please keep this instruction manual in a safe and dry place. This appliance conforms to the following safety electrical European Directives: 2006/95/CE, 2004/108/CE, 98/37/CEE. Please keep this instruction manual in a safe and dry place.
electrolux appliance description Installation Please handle appliance with care to prevent damaging of the refrigeration circuit. Avoid prolonged exposure of the appliance to direct sunlight. Please follow instruction carefully before, during and after installation. If the appliance is transported in vertical position, please place in horizontal (normal) position and wait 1 hour for the oil to return to the compressor before turning unit on.
appliance description electrolux 7 Appliance description The Refreshment Center is a domestic appliance designed to dispense purified cold, carbonated and ambient temperature water and ice-cubes. The appliance has 2 nozzles from which the following products can be Units The unit is mainly composed of: 1 St.
electrolux identification plate Identification plate Should you need to contact a technical Assistance Center, make sure you have the serial number handy for identification. The serial number is on the identification plate in the side of the appliance. Extract from cabinet to identify plate. MODEL XXXXXXXX PNC xxx xxx xxx 230 V ~ 50 Hz TYPE Refreshment Center SERIAL No.: MAX 190 W xxxxxxxx MADE IN ITALY Fig.
installation electrolux 9 Power supply cord Installation Warning In order for the unit to work correctly, the Technical Characteristics specification chart on page 6 needs to be observed. Installation steps: 1. Refreshment Center assembly inside kitchen 2. Frontal spacer installation 3. Water mains connection 4. Water filter connection 5. CO2 bottle connection 6.
electrolux installation 1 Unit positioning Please install unit as far away as possible from heat sources 50 0 54 50 Please install unit higher than the water main in the kitchen 3 Please don’t install the Refreshment Center farther than 4m from the water main or please use another water inlet and discharge tubes. Installing the machine into kitchen furniture with proper characteristics will ensure a correct operation of the equipment.
installation electrolux 11 Please be sure that the frontal edge of the mounting base plate and the frontal edge of the piece of furniture are coincident - Mount the 2 sliding rails onto the base plate already placed in the cabinet, using the eight 3,5x16mm self-threading screws supplied. Fig. 5 - Place the Refreshment Center on the sliding rails. Slide the machine into the cabinet until the “click” indicates that it is locked into position. Fig.
electrolux installation 3 Water mains and siphon connection Warning Connect only to potable water mains. All water mains connections should be carried out by a certified plummer. Warning Water mains pressure can be set through the H2O pressure regulator placed near the CO2 bottle. Please set it after dispensing of at least 500cc of carbonated water. Pressure should be lower than 3.0 bars and higher than 2.0 bars. Complete following operations (Fig. 8): - Connect the flexible hose to the H2O inlet (Fig.
installation electrolux 13 4 Install filter cartridge Lift locking spring placed under drip tray (Fig. 8). Fig. 8 Pull unit from cabinet (Fig. 9). On the left side of the unit please find the filter cartridge (Fig. 1a). Fig. 9 Remove filter plastic cap and install filter in filter head as shown on filter instruction booklet (Fig. 11). Fig. 10 Check for water leaks. 5 CO2 bottle connection Make sure the CO2 bottle is tightly fixed on the CO2 pressure regulator. Fig.
electrolux installation 6 Startup Warning Before plugging unit to power supply, please check for correct power supply voltage and frequency as stated on Technical Characteristics chart (see page 8). Fig. 13 Connect unit to 230V through supplied cord (Fig. 13). Electric supply circuit should conform to local laws and regulations. Warning The supplier declines any responsibility should any safety rule not be respected during installation. Turn unit on through main on/off switch on side of unit (Fig. 14).
installation electrolux 15 Using the Refreshment Center Front touch panel 1 2 3 4 5 6 7 1 Empty CO2 bottle led 5 Cold water button 2 On/Off switch 6 Ice dispense button 3 Water ambient temperature button 7 Light button On/Off 4 Carbonated water button Dispensing After turning appliance on through on/off switch on touch screen, wait for cooling time before dispensing. Place a glass under dispense nozzle. Press button corresponding to desired selection.
electrolux alarms Dispensing is signaled by the corresponding led. In order to dispense in bottles or carafes, please extract dispense nozzle by grabbing on sides of nozzle and pulling forward. Alarms Led indications Led blinks slowly Message Filter is about to exhaust. 2800 liters have been dispensed. Please change filter as described in the following chapters. Led is lit Filter is about to exhaust. 2900 liters have been dispensed. Please change filter as described in the following chapters.
alarms electrolux 17 Carbonated water led blinks slowly Carbonated water is disabled. Protection on carbonation pump activated. To reset status please turn unit off/on on touch control panel after waiting for a while. CO2 bottle led on Carbonated water is disabled. CO2 bottle is empty. Replace CO2 bottle to restore carbonated water dispensing. Please change CO2 bottle as described in the following chapters. Leds - ambient water - ice blink simultaneously Ice forming bin block alarm.
electrolux maintenance All leds on simultaneously All dispense buttons disabled. 2 main causes: 1. Water present on base of unit. Possible leak. 2. Water level too high inside water tank. Water discharge blocked. For the first case switch off and dry the base of the unit. For the second case restart unit through main switch inside cabinet. Should alarms repeat themselves after all restart attempts, please call service assistance.
maintenance electrolux 19 Maintenance Before any maintenance or cleaning procedure, please switch off the appliance and disconnect it from main by unplugging the power plug. CO2 bottle replacement When the CO2 led turns on, it’s necessary to replace the CO2 bottle as described below: 1. Lift locking spring placed under drip tray (Fig. 8). 2. Pull appliance from cabinet (Fig. 15). 3. Grab the CO2 bottle (Fig. 1a) and extract it from it’s locking clip. 4.
electrolux maintenance 7. Lift locking spring placed under drip tray (Fig. 8). Pull appliance from cabinet (Fig. 15). 8. Turn unit off through main on/off switch (Fig. 1b). 9. Remove the filter cartridge form its housing by rotating anti clock-wise about a quarter turn (Fig. 18). This will free the filter. Pull downward and remove it paying attention to avoid water leaks. 10. Fill sanitizing cartridge with Neutral Detergent.
maintenance electrolux 21 14. Shut off unit from main on/off switch (Fig 1b). 15. Remove the sanitizing cartridge and install the new filter cartridge as shown on filter cartridge instructions (Fig. 20). Turn main switch on (Fig. 1b) and push appliance into cabinet(Fig. 21). 16. Wait 4 minutes before turning unit on through the touch panel button. 17. Dispense 1 liter of cold, ambient and carbonated water to fully rinse any sanitizing residue. Fig. 20 Fig.
electrolux environment care Low CO2 pressure CO2 bottle is nearly empty Air inside carbonator Cold water occasionally sprays CO2 gas Carbonation pump malfunction Non return valve on carbonator open Increase CO2 pressure by rotating knob on CO2 pressure regulator clock-wise Change CO2 bottle Dispense few liter of carbonated water and check carbonation Call technical assistance Call technical assistance Warning All repairs should be carried out by authorized technicians.
electrolux 23 Electric diagram EV1 EV2 EV3 EV4 EV5 EV6 SW1 SW2 SW3 SW4 L1-L8 L9 P1 P2 C1 Ambient water electric valve Carbonated water electric valve Cold water electric valve Water main electric valve Hot gas cycle electric valve Ice bin water charge electric valve Microswitch work position Microswitch discharge position CO2 pressure switch Main on-off double pole switch Command panel leds Light bar Carbonator pump Tank discharge pump Compressor PR1 PR2 PR3 PR4 PR5 PR6 M1 M2 M3 F1 T1-T6 TR1 Ice probe
electrolux hydraulic diagram Hydraulic diagram A B C D E F G 1 2 3 4 5 6 7 8 9 10 Water inlet Water drainage Ice cube tray Cold water Carbonated/Sparkling water Ambient water Water dispense nozzle Cooling coil No return valve Pressure reducer Valve CO2 Cylinder Turbine Electric valve Pump Cartridge filter Carbonator device
errata corrige electrolux 25 Errata Corrige Package content The package contains the mentioned material with the addition of: - 10 screws 3.5x16 and 3 screws M4x8 - user instruction manual Installation Cabinet dimensions 50 1.The required dimensions of the cabinet space for the positioning of the unit are: a. Height (1): 380mm b. Depth (2): 560mm c.
electrolux errata corrige Filter cartridge first installation Lift the drip tray and pull upward the locking spring of the Refreshment center util it unblocks (Fig.8) Fig. 8 Pull the bottom edge of the unit and extract the Refreshment Center (Fig.9). After pulling out the unit it is easier to access the left side, that contains the filter cartridge. Fig. 9 Remove the capsule. Connect the filter cartridge to the filter head turning it counter-clockwise (Fig.10) Fig. 10 Check for water leaks.
errata corrige electrolux 27 CO2 bottle first installation Disposable Bottle The CO2 bottle can be found on the left side of the unit. Remove the green cap and screw the pressure reducer onto the bottle until fully tightened (Fig.11). Open the valve on the reducer until it reaches a pressure of about 3 bar (Fig.12). In order to obtain a higher level of CO2 concentration, it is possible to increase the pressure up to a maximum of about 4 bar. Fig.
electrolux errata corrige Alarms Led indications Filter red led blinks slowly Filter red led is on Filter red led stays lit Carbonated water led blinks slowly CO2 bottle led stays lit Meaning Filter is about to exhaust. 2,700 liters of water have been dispensed. Please replace the filter cartridge as described in the paragraph "Filter replacement" Filter exhausted. 2,800 liters of water have been dispensed.
errata corrige electrolux 29 Led indications Meaning - Ambient water - cold water - carbonated water leds blink Volumetric turbine malfunctioning. The two possible causes simultaneously are: and fast 1. Lack of water supply from the water main; 2. Low pressure in the water inlet. Please check the presence of water supply to the unit. Turn unit off and then back on using the on/off switch on the front panel.
electrolux errata corrige Ice melting Do not block ice exit with any object, since it may damage the unit or prevent the correct closing of the exit. This would cause a rise in the internal temperature with subsequent rapid ice melting CO2 bottle replacement (for food) When CO2 led turns on, please replace the old bottle with a new one as described below: 1. unblock the locking spring from under the drip tray (Fig. 8).
errata corrige electrolux 31 Sanification + filter cartridge replacement if few days after the installation the filter replacement led turns on, please activate the sanitation procedure to restore all functions. In such case, filter replacement is not necessary When the “filter” led turns on, it is necessary to replace the cartridge filter as described below: 6. unblock the locking spring (Fig.8) and pull out the Refreshment Center unit (Fig.15); 7. turn off the unit through the main on/off switch; 8.
electrolux errata corrige sanitizing solution; 14. turn off the unit through the main switch; 15. remove the sanification cartridge (Fig.19) and connect the new filter cartridge to the head as shown on filter cartridge instructions (Fig.20); 16. turn on the main switch and push the Refreshment Center into the cabinet until the locking spring clicks (Fig.21); 17. wait 4 minutes before activating the unit pushing the on/off button on the control panel; 18.
errata corrige electrolux 33 Guarantee/Customer Service Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: - The appliance has been correctly installed and used only on the electricity supply stated on the rating
electrolux errata corrige Customer Care For general enquiries concerning your Electrolux appliance, or for further information on Electrolux products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.electrolux.co.
guarantee/customer service electrolux 35 European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
electrolux errata corrige www.electrolux.com Albania Belgique/België/ Belgien +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Èeská republika +420 2 61 12 61 12 Budìjovická 3, Praha 4, 140 21 Danmark Deutschland Eesti +45 70 11 74 00 +49 180 32 26 622 +37 2 66 50 030 España +34 902 11 63 88 Sjællandsgade 2, 7000 Fredericia Muggenhofer Str. 135, 90429 Nürnberg Mustamäe tee 24, 10621 Tallinn Carretera M-300, Km.
guarantee/customer service electrolux 37
electrolux errata corrige
guarantee/customer service electrolux 39
8910