User manual

4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
CAUTION!
To open the oven door, always
hold the handle in the centre.
4.1 Initial Cleaning
Remove all accessories and removable
shelf supports (if applicable).
Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
4.2 Setting the time
You must set the time before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time of Day function
flashes.
Press the + or - button to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time, press
again and again until the indicator
for the Time of Day function flash-
es. You must not set the Duration
or End function at the same
time.
4.3 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function and the maximum
temperature.
2.
Let the appliance operate for one
hour.
3.
Set the function . The maximum
temperature for this function is 210
°C.
4.
Let the appliance operate for ten mi-
nutes.
5.
Set the function and the maximum
temperature.
6.
Let the appliance operate for ten mi-
nutes.
Accessories can become hotter than usu-
ally. The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow is sufficient.
5. HOB - DAILY USE
WARNING!
Refer to the Safety chapters.
5.1 Heat settings
Con-
trol
knob
Function
0
Off position
Con-
trol
knob
Function
Double zone switch
1 - 9 Heat settings
(1 - lowest heat setting, 9 -
highest heat setting)
8
www.electrolux.com