User manual

electrolux 9
Using the ceramic hob for the first time
The cooking surface should be cleaned
before use to remove any traces of the
production process.
Wipe the ceramic surface and frame with
a damp cloth using warm water to which a
little washing up liquid has been added, and
wipe dry.
Heating up for the first time
When using the hob for the first time:
1. place on all the cooking zones a pan filled
with some water;
2. switch the cooking zones on for about
10 minutes at “maximum” position until
water inside the pans boils;
3. open a window for ventilation;
4. then, let the cooking zones to cool
down.
During this time, the cooking zones
may smoke a little and an unpleasant
odour may be emitted. This is
absolutely normal and is caused by
residues of manufacturing.
Once this operation is carried out, let the
cooking zones to cool down, then clean
them with a soft cloth soaked in warm water.
))
))
)
Before the first use of the appliance
Before using the appliance, remove all
packaging, both inside and outside
the appliance, including the
advertising labels and any protective
film.
Using the oven for the first time
Before cooking for the first time,
carefully wash the oven accessories.
Before first use, the oven should be
heated without food. During this time, an
unpleasant odour may be emitted. This is
quite normal.
The oven will work only if the time
of day has been set.
1. Set the time of day with the elec-
tronic programmer (see chapter
"Electronic programmer").
2. Switch the oven function control
knob to conventional cooking
function
.
3. Set the thermostat control knob
to MAX.
4. Open a window for ventilation.
5. Allow the oven to run empty for
approximately 45 minutes.
This procedure should be repeated with
the full grill cooking function
and the fan
cooking function for approximately 5-
10 minutes.
Once this operation is carried out, let
the oven cool down, then clean the
oven cavity with a soft cloth soaked
in warm water to which a little mild
washing-up liquid has been added.
))
))
)