User manual

23
Touch panel functions
In order to activate a function, hold one
finger on the desired area until the associated
control lamp lights up or goes out and the
desired function is activated.
Switching on the hob
The hob is switched on by using the touch
area “On/Off” . Press On/Off for
about 2 seconds. The digital display shows
.
When you have pressed On/Off to start the
hob, a heating setting must be selected
within about 10 seconds or a time set on the
Timer (egg-timer function)
Switch off the hob
In order to switch off the hob completely,
On/Off must be activated. Press
“On/Off” for about 1 second.
Erase the digital display.
When one of or all the cooking zones are
switched off, the residual heat is shown
(“Hot”) for the zone concerned in the digital
display.
Selection of heating setting
To set or change the setting from to
for the desired cooling zone.
Area increases the heat.
Area decreases the heat.
~ 2 sek.
~ 1 sek.