User manual

27
Switching off a cooking zone
To switch off the heat retention setting, press
at the same time and or zero the area
with .
Using the hob with activated locking function
(To engage the function lock, see the chapter Safety, page 10).
Even if the function lock is activated, the
hob can be used, but the next time that the
hob is switched on, the function lock is
again activated.
1. Switch on the cooking zones.
If the function lock is activated, this is
shown: .
2. Press at the same time on two optional
areas for the heating positions and for
about 1 second and .
A signal sounds as confirmation.
The cooking zones and settings can be set
as usual until the hob is switched off again.
Disengaging the function lock
1. Switch on the cooking zones
If the function lock is activated, this is
shown .
2. Press the area “Function lock” for
about 3 seconds.
A signal sounds as confirmation.
3. Press an optional heating setting .
~ 2 sec.
~ 1 sec.
~ 2 sec.
~ 3 sec.