User manual

35
Switch off the oven
Switch off the oven by pressing the
button.
Heat indicator
HEATING UP
When the oven function has been selected,
the indicator starts to flash how much the
oven has heated up.
If Quick start is functioning, then a “running
pillar” is seen (this functions only for the
oven function top/bottom heating)
SWITCHING OFF
When the oven functions have been
switched off, the indicator lights up to show
that there is residual heat in the oven.
Using the clock functions
• After a clock function has been selected. the associated function flashes for
about 5 seconds. During this time the desired times can be set or changed with
the button or .
• After the desired time has been set, the function flashes again for about
5 seconds. Then the function lights up. The set time starts to count down.
Checking the set or remaining time
Press repeatedly on the button Function choice until the respective clock function
flashes and the set or remaining time is shown.
Using the residual heat with the clock functions Cooking time
and Stop time
When the clock functions Cooking time and Stop time are used, the oven
switshes off the heating elements after 90% of the set or calculated time. The remaining
residual heat is used to continue the cooking process up to the end of the set time.