User manual

56
Oven step units
It is possible to remove the oven step units
on both the right and left side walls to make
it easier to clean the side walls.
REMOVING THE OVEN STEP UNITS :
First pull out the step unit at the front from
the side of the oven (1) and then hook it off
at the back (2).
INSERTING THE OVEN STEP UNITS
The rounded edges of the bars must point to
the front!
Re-fit the oven step unit again by first
hanging it up at the back (1), insert it at the
front, and then push it into position (2).
Cleaning the baking shelf rails
Loosen the step units (see page 56). To
facilitate the removal of dirt and fat, they
can be soaked in water with washing-up
liquid. Wash by hand. NOTE!
DO NOT USE
THE DISHWASHER . This removes all the fat
and impairs their function.