User manual

6
Installation
Any work required on the cooker
must be carried out by a
QUALIFIED
EXPERT . The cooker is heavy. Edges
and corners, with which you do not
normally come into contact, can be
sharp.
U SE GLOVES WHEN MOVING
THE COOKER .
When delivered, the cooker is adjusted to a
bench height of 900 mm (35.4"). The cooker
has a telescopic plinth. You can change the
height so that the cooker suits a bench height
from 848 mm (33.4") up to 933 mm (36.7").
Take care when positioning the cooker
that you do not block the ventilation outlets
(behind the cooker and at the top behind the
hood), the cooker must not be pushed in
under a tiled edge or similar.
The cooker must have a clearance on both
sides (see Safety).
Make sure that the cooker cable does not
get crushed when moving the cooker.