User manual

The ceramic hob
12
Functions for safety
The cooker function lock
There is a lock built in to the oven’s thermostat control
with two safety positions. You can choose whether to use
the lock with single or double safety or not at all.
NOTE !
The main power supply to the cooker is still connected.
LOCK ONE : The power to the hotplates and oven is dis-
connected when the thermostat control is turned to OFF.
LOCK TWO : When the lock button is also activated,
two hands are needed to turn the cooker on. This makes
it particularly difficult for children to “use” the cooker.
Lock One
LOCK THE COOKER LIKE THIS ( see illustration A):
Turn the thermostat control anti clockwise to OFF.
W HEN YOU WANT TO USE THE COOKER :
1 Turn the control clockwise to zero (i.e. turn the
control back to the 12 o’clock position).
2 The cooker can be used as normal. Make sure no
functions other than the one/those you want to
use are turned on. (Someone may have turned a
control while the lock was activated).
Lock Two
B EFORE USING ‘ NUMBER TWO ’ FOR THE FIRST TIME ,
YOU HAVE TO ACTIVATE THE LOCK BUTTON
(
see illustration B):
1 Turn the thermostat control to zero, i.e. turn the
control to the 12 o’clock position.
2 Place a table knife behind the control and
remove it by pulling gently.
3 Remove the red covering.
4 Replace the control set at ‘zero’.
Next time you will only need to turn the thermostat
control anti clockwise to OFF to lock the cooker
(see illustration A).
W HEN YOU WANT TO USE THE COOKER
( see illustration C):
1 Press down the lock button and keep it pressed in.
2 Turn the control clockwise to zero (i.e. turn the
control back to the 12 o’clock position).
3 The cooker can be used as normal. Make sure no
functions other than the one/those you want to use
are turned on. (Someone may have turned a
control while the lock was activated).