User manual

Installation

Fit the

(A)

screws in the desired set of holes

for 85, 88 or 90 cm worktop height

(

SEE

ILLU

STRATION

Lift the cooker back into the upright position

and connect it to the electrical supply. Push the

cooker into place and adjust its level (see below)

before fitting the safety equipment.

Levelling the cooker

The cooker must be level, for example to ensure that oil

in frying pans is of even depth. To check whether the

cooker is level, place a spirit level or a frying pan filled

with water on the hob.

You can lower (-6 mm) or raise (+12 mm) the

wheels and feet, working from the front of the cooker.

Use a Phillips screwdriver to adjust the rear wheels,

and adjustable pliers for the front feet (1). Once the

cooker is properly level, you need to lock these feet

with the nut. Turn it anticlockwise (2) using the

spanner supplied.

Electrical connection

Repairs and work on the cooker must be carried

out by a

QUALIFIED

ELECTRICIAN

. Work performed

by unqualified persons can damage the cooker,

and may also lead to personal injury and/or

damage to property.

The connection options for the cooker are shown on

the plate on the rear of the cooker. Wattage and voltage

is stated on the rating plate (see the right-hand side of

the cooker).