User manual

The hob
11
Cleaning the hotplates
Remove spillages as soon as possible, to prevent them
from burning onto the hotplate. Soilage impairs the
transfer of heat to the pan.
Cleaning and anti-corrosion treatment
1 Clean the hotplates thoroughly with soapimpreg-
nated steel-wool. Wash off all traces of soap, and
dry using paper towels.
2 When the hotplates are cold and dry, apply an even
layer of the anti-corrosion product to each. This
product is available from Electrolux dealers.
3 The product now needs to be heated on the hot-
plates. Heat one hotplate at a time on full power for
no more than five minutes. Some smoke and fumes
are to be expected as the remaining solvent evapo-
rates.
4 Use white spirit to remove any traces of the product
on your hands or (after the cooker has cooled) on
the cooker enamel.
max. 5 min.