User manual

The oven
21
To change the oven light bulb
1 Turn all controls to off and check that the oven
is not hot.
2 Unscrew the glass cover (see illustration).
3 Unscrew the old bulb.
4 Fit a new bulb, marked 230–240 V, 15 W and
300°C, with an E14 screw fitting.
5 Refit the glass cover.
The fan
You can remove the fan blades for cleaning, but do so
with care, as they have sharp edges.
1 Make sure the oven is turned off and is cold.
2 Unscrew the four screws (A) and remove the
back wall of the oven.
3 Take hold of the fan impeller carefully and undo
the nut (B), by turning it clockwise with a small
adjustable spanner.
4 Clean the fan blades in hot soapy water.
5 Refit all the parts. Make sure all the screws are
securely in place.
The oven accessories
Release each side rack for the oven shelves at the bot-
tom corners (1), lift it sideways and upwards and
remove from the oven (2). Wash the racks and shelves
by hand or in a dishwasher. If very soiled, soak them
first, before cleaning with a steelwool pad.
The baking trays and oven dish should be wiped
clean with paper towels, or washed by hand when
necessary. Any burnt-on food can be removed using a
suitable spatula.
Storage drawer
1 Empty the drawer and pull it out as far as possible.
2 Hold the handle and lift upwards gently. This
frees the drawer from the catch at the back.
3 Pull the drawer out completely and lift it out.
After cleaning, place the drawer wheels on the brack-
ets
( SEE PICTURE ) . Lift the drawer slightly as you first
push it in so as to prevent the wheels from fastening in
the front catch.
B
A
2
1