User manual

10
If you close the lid of the
appliance while any of the
hotplate burners are lit,
the gas will go out. This is
because it would be
dangerous if the burners
stayed on when the lid
was closed.
Always use the control
knob to turn off a burner.
Do not use the lid as a cut-
off device. This will only
cut off the gas when the
lid is closed. The gas will
flow again when the lid is
opened.
To turn off any burner
1. Turn the control knob to the off
position. This is shown by a
large dot.
When lighting any burner,
ensure that it is lit before
you leave the appliance.
When turning off a burner,
ensure the flame has gone
out before leaving the
appliance.
In the event of the burner
flames being accidentally
extinguished, turn off the
burner control and do not
attempt to re-ignite the
burner for at least 1 min.
Things to note
If you are having any difficulty
lighting a hob burner turn all the hob
controls off and make sure the
burner parts have been replaced
correctly.
Hints and tips
• Do not overfill pans or they will
boil over.
• Do not use pans with very
heavy handles which cause the
pan to tip.
• The hob surface should be
allowed to cool before closing
the lid.
Do not use the lid as a
work surface or chopping
board. This could damage
the glass and reduce its
strength.
Place pans on the centre of
the burners.
Position pans so the
handles cannot be
accidentally knocked or
overhang the appliance.
Lift pans on and off the pan
supports.
Do not slide them across
the hob.