User manual

29
3. Hold the door glass securely in
place with one hand before
removing the screws completely
with the other hand.
4. Using both hands, gently tilt the
top of the door glass towards
you, lift slightly to disengage the
locators from the two bottom
brackets.
5. Clean the outer and inner glass
using hot soapy water or Hob
Brite cleaner may be used. DO
NOT use Hob Brite on the
Stainless Steel or painted
finishes. DO NOT try to clean
the foil which is inside the door.
The foil is there to help keep the
door cool, if it is damaged it will
not work. Ensure that all parts
are well rinsed and thoroughly
dried before attempting to
replace the outer door.
If the door glass panel
becomes chipped or has
deep scratches the glass will
be weakened and must be
replaced to prevent the
possibility of the panel
shattering. Please contact
your local Service Force
Centre who will be pleased to
advise further.