User manual

electrolux 9
The Gas Burner Controls
Control knobs on the gas hob
The knobs for using the gas hob of
the cooker are found on the control
panel. The regulation knobs could be
turned in anti-clockwise direction until
the small flame symbol, and vice-versa
for the larger symbol.
z No gas supply
Maximum gas supply
Minimum gas supply
To light a burner:
1. press the ignition switch marked by
a small spark ( );
2. push the relevant control knob in
completely and turn it anticlockwise
to the maximum position ( );
4. then, check the flame is regular and
adjust it as required.
If the burner does not ignite, turn the
control knob to zero, and try again.
If after a few attempts the burner
does not ignite, check that the burner
cap and crown (see figure 2, letter A, B)
are correctly positioned.
To interrupt the supply of gas, turn
the knob in a clockwise direction to the
position "z".
When lighting the hob manually
(in case of lack of electricity): Hold a
flame near the burner. Never turn the
control knob before approaching the
burner with the flame.
))
))
)
A - Burner Cap
B - Burner crown
C -Spark generator