User manual

Problem Possible cause Remedy
The flame is blow out
immediately after igni-
tion
Thermocouple is not
heated sufficient
After lightning the flame, keep the
knob pushed for approximately 5
seconds.
The gas ring burns
unevenly
Burner crown is
blocked with food
residues
Make sure that the injector is not
blocked and the burner crown is
clear of food particles.
The appliance does
not operate
The fuse in the fuse
box is released
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
The oven does not
heat up
The oven is not
switched on
Switch on the oven.
The oven does not
heat up
The necessary set-
tings are not set
Control the settings.
The oven lamp does
not operate
The oven lamp is de-
fective
Replace the oven lamp.
Steam and condensa-
tion settle on the food
and in the oven cavity
You left the dish in
the oven for too long
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
13.1 Location of the appliance
A
B
C
C
A
20
www.electrolux.com