User manual

Burner Normal
power
Re-
duced
power
Type of gas Pres-
sure
Injector
diameter
Usage
kW kW mbar mm g/h
1,65 - Propane G31 28 - 30 0,71 117,83
13.3 Gas Connection
Choose fixed connections or use a flexible
pipe in stainless steel in compliance with
the regulation in force. If you use flexible
metallic pipes, be careful they do not
come in touch with mobile parts or they
are not squeezed.
13.4 Flexible nonmetal pipes
connection
If it is possible to easily and fully control
the gas connection, you can use a flexible
pipe. You must tightly attach the flexible
pipe by clamps.
To install, use a pipe holder. Make sure
that you tightly attach the pipe holder to
the gasket, and then continue with the
gas connection. The flexible pipe is cor-
rect when:
It cannot become hotter than room
temperature or higher than 30 °C.
It is no longer than 1500 mm.
It does not compress.
It is not subject to traction or torsion.
It does not make contact with sharp
edges or corners.
You can easily examine it in order to
check its condition.
To preserve the flexible pipe, you must
regularly check if:
It does not show cracks, cuts or burn
marks on the two ends and its length.
The material is correctly elastic and not
hardened.
The fastening clamps are not rusted.
It is not expired.
If you can see one or more defects, do
not repair the pipe, but replace it.
After installation is complete, use
a soapy solution and never a
flame to see if you sealed all the
pipe fittings perfectly.
The gas supply ramp is on the rear side of
the control panel.
WARNING!
Before gas connection discon-
nect the mains plug from the
mains socket or switch off the
fuse in the fuse box. Close the
primary valve of the gas sup-
ply.
ABC
DE
A)
Gas connection point (only one point
is applicable for appliance)
B)
Gasket
C)
Adjustable connection
D)
Natural Gas pipe holder
E)
LPG pipe holder
The appliance is set to default
gas, to change the setting choose
pipe holder from the list. Always
use the gasket sealing
13.5 Adjustment to different
types of gas
WARNING!
Let only an authorized person do
the adjustment to different types
of gas.
This appliance is for operation
with liquid gas.
With the correct injectors, you can
also operate it with natural gas.
22
www.electrolux.com