User manual

6.
Turn the knob for the oven functions
from the maximum to the minimum
position.
Control the flame. If the flame goes out,
do the procedure from point 1 to point 6
again. There must be a small regular
flame on the oven burner crown.
The manufacturer declines liability if
you do not obey these safety meas-
ures.
13.9 Grill injector replacement
1.
Remove the grill burner after remov-
ing the fixing screw A.
A
2.
Replace the nozzle by means of a No
7 socket spanner.
3.
Refit all parts and test.
4.
Before fixing of the screws, ensure
that the grill burner is pushed correct-
ly to the back panel.
The grill temperature cannot be
adjusted. To get a lower tempera-
ture or slower cooking time, lower
the grill pan away from the flame.
13.10 Electrical installation
The manufacturer is not responsi-
ble if you do not follow safety pre-
cautions from chapter "Safety in-
formation".
This appliance is supplied with a main
plug and a main cable.
The power cable must not touch
the part of the appliance shown in
the illustration.
14. SAUDI ARABIA - CUSTOMER SERVICE
14.1 Further after-sales service
agencies overseas
In these countries our respective agents’
own guarantee conditions are applicable.
Please obtain further details directly.
Bader Hassan AL-Hussaini Trading
Est.
Main service center address:
Al Khalidiya area – Port Street – Building
name: Mussa 4
AL Dammam, Kingdom of Saudi Arabia.
Postal address:
P.O Box 4076
AL-Khobar 31952 – Kingdom of Saudi
Arabia
National Service center:
tel. [phone]
ENGLISH 25