User manual

ManualsBrandsElectrolux ManualsDomestic AppliancesEKI64500OX

Problem Possible cause Remedy

It takes too long to cook

the dishes or they cook too

quickly.

The temperature is too low

or too high.

Adjust the temperature if

necessary. Follow the ad‐

vice in the user manual.

The display shows an error

code that is not in this ta‐

ble.

There is an electrical fault. Deactivate the oven with

the house fuse or the safe‐

ty switch in the fuse box

and activate it again.

If the display shows the er‐

ror code again, contact the

Customer Care Depart‐

ment.

The display shows "12.00". There was a power cut. Reset the clock.

You cannot activate or op‐

erate the oven. The display

shows “400” and an acous‐

tic signal sounds.

The oven is incorrectly

connected to an electrical

supply.

Check if the oven is cor‐

rectly connected to the

electrical supply (refer to

the connection diagram if

available).

13.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

The necessary data for the service

centre is on the rating plate. The rating

plate is on the front frame of the

appliance cavity. Do not remove the

rating plate from the appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

14. INSTALLATION

WARNING!

Refer to Safety chapters.

14.1 Location of the appliance

You can install your freestanding

appliance with cabinets on one or two

sides and in the corner.

For minimal distances for fitting check

the table.