User manual

The flexible pipe must be tightly fixed using
clamps according to the rules in force.
The flexible pipe should be made ready for
use in such a way that:
• nowhere it can reach over temperature,
other than room temperature, higher than
30
°
C; if the flexible pipe, to reach the cock,
must run behind the range, it must be in-
stalled as shown below;
• it is no longer than 1500 mm;
• it shows no throttles;
• it is not subject to traction or torsion;
• it does not get in touch with cutting edges
or corners;
• it can be easily inspected in order to check
its condition.
The control of preservation of the flexible pipe
consists in checking that:
• it doesn't show cracks, cuts, marks of
burning both on the end parts and on its
full extent;
• the material is not hardened, but shows its
normal elasticity;
• the fastening clamps are not rusted;
• expiry term is not due. If one or more ab-
normalities are seen, do not repair the
pipe, but replace it.
• it cannot come into contact with moveable
parts of the appliance;
• it does not pass through any space sus-
ceptible of becoming congested;
Important! Once installation is complete,
check the perfect seal of every pipe fitting,
using a soapy solution, never a flame.
Adaptation to different kinds of gas
To adapt the appliance to a different kind of
gas from the one the appliance has been set
for, follow the instructions below in their or-
der.
Gas connection :
LPG: use the rubber pipe holder, no.4.
Natural gas : use the pipe holder, no.5.
Always insert the gasket sealing, no.2. Then
proceed with the gas connection, as indica-
ted in the relevant paragraphs.
1 Gas connection point
2 Gasket
3 Adjustable connection
4 LPG rubber pipe holder
5 Natural gas pipe holder
electrolux 23