User manual

Warning! Do not attempt to use the
oven without the glass being in place.
Replacing an oven light bulb
The type of bulb required is a 300°C 25 watt
small Edison Screw.
Warning! Disconnect the appliance
from the electricity supply before
replacing the bulb.
1. Make sure the appliance is cool before
replacing the bulb.
2. Open the door and remove the shelves
and wire work runners.
3. Remove the glass cover by turning it to
the left.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass
bulb cover.
6. Refit the wire work runners and replace
the oven shelves.
7. Restore the electricity supply and reset
the time of day.
What to do if…
Please carry out the following checks on your
appliance before calling a Service Engineer.
It may be that the problem is a simple one
which you can solve yourself without the ex-
pense of a service call.
In-guarantee customers should make sure
that the checks have been made as the en-
gineer will make a charge if the fault is not a
mechanical or electrical breakdown.
Please note that proof of purchase is re-
quired for in-guarantee service calls.
Problem Possible solution
The grill, ovens and timer do not work. Check that the appliance has been wired in to the
appliance supply and is switched on at the wall.
Check that there is not a problem with your gas
supply. You can do this by making sure the other
gas appliances such as central heating or gas fires
are working.
Check that the main appliance fuse is working.
If you have checked the above: Allow the appli-
ance to cool for a couple of hours. The appliance
should now be working normally.
The grill and top oven work but the main oven
does not.
Check that the time of day has been set on the
clock. Check that the oven is set for manual cook-
ing.
electrolux 19