User manual

1 2

English

CLEANING THE HOSE AND NOZZLE

The vacuum cleaner stops automatically if the nozzle,

cases, disconnect from outlet and allow to cool for 20-30

and restart.

Tubes and hoses

1 Use a rod or similar to clear the tubes and hose.

2 It may also be possible to remove the obstruction in

the hose by squeezing it. However, be careful in case

the obstruction is caused by glass or needles caught

inside the hose.

caused by cleaning it.

3 To avoid deterioration of suction power, frequently

clean it is by using the hose handle.

5 Remove dust-balls, hair or other objects that may be

entangled. Use the crevice nozzle to clean the wheel

axles. Replace the wheels by pressing them onto the

axles.

6 Larger objects can be accessed by removing the con-

nection hose (press the small catches located on each

side and simultaneously draw the connection tube

outwards in an upright position).

7 Remove the object(s) and replace the connection

hose.

Cleaning the turbo nozzle

8 Disconnect the nozzle from the vacuum cleaner tube

and remove entangled threads, etc. by snipping them

away with scissors. Use the hose handle to clean the

nozzle.

Maintenance continued

CMY