Owner's Guide

Drying System
Maintenance Procedures
Empty Water Container
(if direct drain kit not installed)
When the “EMPTY WATER CONTAINER”
indicator comes on, follow these steps to
empty the container:
4. Return container fully before continuing
operation of dryer.
Care and Cleaning
1. Support the container as you pull it out.
2. Hold container level to prevent water from
spilling.
3. Dump water container in sink or drain.
CAUTION
DO NOT operate dryer without lint filter in
place.
CAUTION
DO NOT drink or prepare food with the con-
densed water from your drye r water. It can
cause health problems to people and pets.
Clean Lint
When the “CLEAN LINT” indicator comes on,
follow these steps to clean the filter:
1. Remove the filter by pulling straight up.
2. Release the latch on the filter grille to
open the filter.
3. Remove trapped lint and larger particles
by hand.
4. If necessary, clean filter screen with hot
water.
5. Return filter before continuing use of dryer.
NOTE
Extend the water container nozzle all the way
out to ensure all water has been emptied
from the container.
Nozzle
1
1
15