Technical data

Fitted Equipment
Timed Override: -
1 Move the Function Select Slider down to
the "Timed Manual Override" position.
The display will read - h with ON or OFF
to the Right (depending on the current
switch state).
2. Set the override duration using the + and
- "Up / Down Keys" the time is shown in
(h) hours and (d) days and the set time
can be from 1 to 23 hours or 1 to 27
days.
3. Change the current switch state to the
override state by pressing the "On /Off
Switch Select" button.
4. Return the Function select slider to the
"Auto" position. The override will start
ONLY when the Function Select Slider is
returned to the "Auto" mode, when in
auto mode the ON / OFF display will flash
to show the override state.
Note on Duration: - If X hours are
selected, the override timer decrementation
will start on changing mode.
If X days are selected, the override timer
decrementation will start at midnight (the
present day counting for a whole day).
Power Supply
The Programmable Timer Module requires a
12v supply to operate fully, without this
supply switching actions will not take place
and the display in "Auto" Mode will not
appear. The unit is fitted with internal battery
backup of 25000hrs minimum reserve this
will retain all programming and allow new
programming when a 12v supply is not
present.
68