Technical data

Technical Manual EMP 8x0.00/04/13 v5 wh Münzprüfer Dietmar Trenner GmbH, Germany
Version 1.51
Page 40/42 subject to technical modification EMP8x0.00/04/13 v5
The output line is specified directly for the EMP 8x0.00 v5, which is a number
between 1 and 6. The output line combination is given in the hexadecimal
equivalent for binary code in the EMP 8xx.04 v5.
5 Maintenance
The EMP 800 v5 is an extraordinarily robust coin selector and operates relatively
maintenance free. However, it should be cleaned at regular intervals especially if it
is operating in an environment with high levels of dust, smoke or nicotine. The
cleaning intervals are of course dependent on the level of air borne contaminants.
Modest use with minimum contaminant levels indicate the need to clean the top of
the coin path once a year. Open the coin path door and wipe the exposed surfaces
with an alcohol moistened cloth. The light sensors may be cleaned with a soft
brush or air spray duster.