Basic Guide

6. Unscrew the middle hinge (m2). Remove the

plastic spacer (m1).

7. Remove the lower door.

8. Remove the spacer (m6) and move to the oth-

er side of the hinge pivot (m5).

9. Remove using a tool the cover (b1). Unscrew

the lower hinge pivot (b2) and the spacer (b3)

and place them on the opposite side.

10. Re-insert the cover (b1) on the opposite side.

11. Remove the stoppers (d1) and move to the

other side of the doors.

12. Remove the left-hand cover pin of the middle

hinge (m3,m4) and move to the other side.

13. Fit the pin of the middle hinge (m5) into the left-

hand hole of the lower door.

14. Re-insert the lower door on the pivot pin (b2).

15. Re-screw the middle hinge (m1) on the oppo-

site side . Do not forget the plastic spacer (m2)

inserted under the middle hinge.

16. Re-insert the upper door on the middle hinge

(m5).

Make sure that the edges of the doors run

parallel to the side edge of the appliance.

17. Position and fix the upper hinge (you can find

them in the instruction for use bag) on the op-

posite side (t6).

18. Insert the panel (t7) (that can be found in the

instruction for use bag).

19. Open the upper door, attach the top cover (t2)

using screws (t1). Insert the magnet (d7).

Close the door.

22 electrolux