User manual

ManualsBrandsElectrolux Manualsindustrial & lab equipmentEOA5651BOX

Clock function Application

END To set when the appliance must deactivate. Use only

when an oven function is set. You can use Duration

and End at the same time (time delay), if the appliance

is to be activate and deactivate automatically later.

Press again and again to

switch between the clock

functions.

To confirm the settings of the

clock functions, press or

wait 5 seconds for an

automatic confirmation.

6.2 Setting the DURATION or

END

1. Press again and again until the

display shows or .

or flashes in the display.

2. Press or to the set the values

and press to confirm.

For Duration

first you set the minutes

and then the hours, for End first you

set the hours and then the minutes.

An acoustic signal sounds for 2 minutes

after the time ends. or symbol and

time setting flash in the display. The oven

stops.

3. Turn the knob for the oven functions

to the off position.

4. Press any button to stop the acoustic

signal.

If you press when you set

the hours for DURATION ,

the appliance goes to setting

of the END function.

6.3 Setting the MINUTE MINDER

1. Press .

and "00" flash in the display.

2. Press

or to set the MINUTE

MINDER.

First you set the seconds, then the

minutes and then the hours.

At first, the time is calculated in

minutes and seconds. When the time

you set is longer than 60 minutes, the

symbol comes on in the display.

The appliance now calculates the time in

hours and minutes.

3. The MINUTE MINDER starts

automatically after five seconds.

After 90% of the set time, an acoustic

signal sounds.

4. When the set time ends, an acoustic

signal sounds for two minutes.

"00:00" and

flash in the display.

Press any button to stop the acoustic

signal.

If you set the MINUTE

MINDER when the

DURATION or END

function operates, the symbol

comes on in the display.

6.4 Count Up Timer

Use the Count Up Timer to monitor how

long the oven operates. It is on

immediately when the oven starts to heat.

To reset the Count Up Timer, press and

hold and . The timer starts to count

up again.

The Count Up Timer cannot

be used with the functions:

Duration , End , core

temperature sensor.