User manual

6.
When the set time ends, the symbol
or and the set time flash. The
acoustic signal sounds for two mi-
nutes. The appliance deactivates.
Press a button to stop the signal.
7.
Turn the oven function control knob
to the off position.
If you press while setting the
time for Duration
, the appli-
ance switches to setting the End
function.
6.2 Setting the Minute Minder
Use it to set a countdown time. The maxi-
mum time you can set is 23 hours 59 mi-
nutes. This function has no effect on the
operation of the oven. You can set the Mi-
nute Minder at any time, also if the appli-
ance is off.
1.
Press . and 00 flash in the dis-
play.
2.
Press + or - to set the Minute Minder.
At first the time is calculated in mi-
nutes and seconds. When the time
you set is longer than 60 minutes, the
symbol
comes on in the display.
The appliance then calculates the
time in hours and minutes.
3.
The Minute Minder starts automatical-
ly after five seconds.
After 90% of the set time, an
acoustic signal sounds.
4.
When the set time ends, the acoustic
signal sounds for two minutes. 00:00
and
flash in the display. Press a
button to stop the signal.
If you set the Minute Minder when
the Duration or End function oper-
ates, the symbol
comes on in
the display.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
ately when the oven starts to heat.
To reset the Count Up Timer, press and
hold + and -. The timer starts to count up
again.
You cannot use the Count Up
Timer when the Duration
or
End
function operates.
7. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
7.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the ta-
ble for roasting.
• The core temperature. Refer to the ta-
ble for the core temperature sensor.
Only use the core temperature
sensor supplied with the appli-
ance, or genuine replacement
parts.
1.
Set the oven function and the oven
temperature.
2.
Put the point of the core temperature
sensor (with the symbol
on the
handle) into the centre of the meat.
3.
Put the plug of the core temperature
sensor into the socket on the front of
the appliance. The display shows the
10
www.electrolux.com