User manual

symbol of the core temperature sen-
sor and the default core temperature.
When you use the core temperature
sensor for the first time, the default
core temperature is 60 °C.
4.
While flashes, you can use the
knob for the temperature to change
the default core temperature.
5.
Press to save the new core tem-
perature , or wait 10 seconds for the
setting to be saved automatically. The
new default core temperature is dis-
played during the next use of the core
temperature sensor.
6.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
7.
When the meat is at the set core tem-
perature, the symbol for the core
temperature and the core tempera-
ture sensor flash. An acoustic signal
sounds for two minutes. Press a but-
ton or open the appliance door to
stop the signal.
8.
Remove the plug of the core temper-
ature sensor from the socket . Re-
move the meat from the appliance.
9.
Deactivate the appliance.
When the appliance calculates the
provisional duration time for the
first time, the symbol - flashes in
the display. When the calculation
ends, the display shows the dura-
tion of the cooking. Calculations
run in the background during the
cooking and the duration value in
the display is updated if necessa-
ry.
You can change the core temperature
at any time during the cooking:
1.
Press :
– One time - the display shows the
set core temperature which
changes every 10 seconds to the
current core temperature.
– Two times - the display shows the
current oven temperature which
changes every 10 seconds to the
set oven temperature.
– Three times - the display shows the
set oven temperature.
2.
Use the knob for the temperature to
change the temperature.
7.2 Telescopic runners
°C
1.
Pull out the right and left hand tele-
scopic runners.
ENGLISH 11