User manual

5.5 Buttons
Button Function Description
Clock To set a clock function.
,
Minus, plus To set the time.
Minute Minder To set the Minute Minder. Hold this button for
more than 3 seconds to activate or deactivate the
oven lamp.
Temperature To check the oven temperature or the core tem-
perature of the food probe (if applicable). Use only
while an oven function is in operation.
5.6 Heat-up and residual heat
indicator
When you activate an oven function, the
bars in the display
come on one by
one. The bars show that the oven temper-
ature increases or decreases.
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more
than 40 °C. Turn the temperature knob
left or right to show the oven temperature
on the display.
6. CLOCK FUNCTIONS
Sym-
bol
Function Description
Minute Minder To set a countdown time.
Time of day To set, change or check the time of day. Refer to "Set-
ting the time of day".
Duration To set how long the appliance must operate. First set an
oven function before you set this function.
End To set when the appliance must be deactivated. First set
an oven function before you set this function. You can
use Duration and End at the same time (Time Delay) to
set the time when the appliance must be activated and
then deactivated.
Press again and again to
change the clock function.
Press to confirm the settings
of the clock functions, or wait 5
seconds for the setting to be con-
firmed automatically.
6.1 Setting the Duration or End
function
1.
Press again and again until the
symbol
or flashes in the dis-
play.
2.
Press + or - to set the minutes.
3.
Press to confirm.
4.
Press + or - to set the hour.
5.
Press to confirm.
ENGLISH 9