User manual

Problem Possible cause Remedy
The display shows "C2". You want to start the Cat‐
alysis or Defrost function,
but you did not remove the
core temperature sensor
plug from the socket.
Remove the core tempera‐
ture sensor plug from the
socket.
The display shows an error
code that is not in this ta‐
ble.
There is an electrical fault. • Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
There is no good cooking
performance using the
function: True Fan Cooking
PLUS.
You did not turn on the
function: True Fan Cooking
PLUS.
Refer to "Activating the
function: True Fan Cooking
PLUS".
There is no good cooking
performance using the
function: True Fan Cooking
PLUS.
You did not turn on cor‐
rectly the function: True
Fan Cooking PLUSwith the
Plus Steam button.
Refer to "Activating the
function: True Fan Cooking
PLUS".
There is no good cooking
performance using the
function: True Fan Cooking
PLUS.
You did not fill the cavity
embossment with water.
Refer to "Activating the
function: True Fan Cooking
PLUS".
You want to activate the
True Fan Cooking function,
but the indicator of the
Plus Steam button is on.
The True Fan Cooking
PLUS function operates.
Push the Plus Steam but‐
ton to stop the True
Fan Cooking PLUS func‐
tion.
You want to activate the
cleaning function, but the
display shows "C4".
The Plus Steam button is
pressed in.
Press the Plus Steam but‐
ton again.
The water in the cavity em‐
bossment does not boil.
The temperature is too low. Set the temperature at
least to 110 °C.
Refer to "Hints and tips"
chapter.
The water comes out of
the cavity embossment.
There is too much water in
the cavity embossment.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
www.electrolux.com32