User manual

Cleaning the door glass

Clean the door glass thoroughly with a solution of water and washing up liq-

uid. Then dry it carefully.

Putting the door glass back

1. From above insert the door glass at an

angle into the door profile at the bot-

tom edge of the door and lower it.

2. Take hold of the door trim (B) at each

side, position it on the inside edge of

the door and plug the door trim(B) into

the upper edge of the door.

3 On the open side of the door trim (B)

there is a guide bar (C). This must be

pushed between the outer door panel

and the guide corner(D).

The clip seal (E) must be snapped in.