User manual

5.4 Display
A B C D
A. Function indicator
B. Time display
C. Function indicator
D. Core temperature sensor indicator
5.5 Buttons
Button Function Description
MINUS To set the time.
PLUS To set the time.
6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change
the time of day only when the appliance is off.
MINUTE MINDER Use to set a countdown time. This function has no
effect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appli‐
ance is off.
6.2 Setting and changing the
time
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
1. Press the or to set the correct
time.
After approximately 5 seconds, the
flashing stops and the display shows the
time of the day you set.
2. To change the time of day, press
and at the same time until
starts to flash.
When the timer function is
active, you cannot change
the current time.
6.3 Setting the Minute Minder
Press or again and again to set
the necessary time.
The Minute Minder starts automatically
after 5 seconds.
When the set time is completed, an
acoustic signal sounds. Press any button
to stop the signal.
To cancel the Minute Minder function
press or then press and hold
until the clock function goes out and
acoustic signal sounds.
ENGLISH 9