User manual

Symbol Name Description
Odour filter The odour filter operates.
Heat-up / residual heat indi‐
cator
Shows the temperature level in the ap‐
pliance.
Temperature / fast heat up The function operates.
Temperature You can examine or change the tem‐
perature.
Core temperature sensor The core temperature sensor is in the
core temperature sensor socket.
Minute minder The minute minder function operates.
4.3 Heat up indicator
If you activate an oven function, the bars
come on in the display. The bars
show that the temperature in the
appliance increases or decreases.
When the appliance is at the set
temperature, the bars go off the display.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows h and 12:00. "12" flashes.
1. Touch or to set the hours.
2. Touch .
3. Touch
or to set the minutes.
4. Touch or .
The Temperature / Time display shows
the new time.
5.3 Changing the time
You can change the time of day only
when the appliance is off.
Touch
.
flashes in the display.
To set the new time of day, refer to
"Setting the time".
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Operating the appliance
To operate the appliance you can use:
ENGLISH 9