User manual

20 electrolux operating the oven
How to use the clock functions
• After a clock function has been se-
lected, the corresponding function
flashes for about 5 seconds. During
this period, the desired times can be
set or modified using the or but-
ton.
• When the desired time has been set,
the function continues to flash for
approx. 5 seconds. After that the
function is then lit. The set time be-
gins to run.
Checking the time set or remaining
Press the Selection button re-
peatedly, until the appropriate clock
function flashes and the time set or
remaining is displayed.
Using residual heat with the Cook
time and End time clock func-
tions.
When the Cook time and End
time clock functions are used, the
oven switches the heating elements off,
when 90% of the time set or calculated
has elapsed. The residual heat present
is used to continue the cooking process
until the time set has elapsed
(3 to 20 mins.).