User manual

4. Cover the core temperature sensor
with the remaining ingredients.
5. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
The display shows flashing and the
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
6. Touch or to set the core
temperature.
7. Touch or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If is in
the display but does not
flash before you set the
core temperature, touch
and or to set a
new value.
8. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
.
When the dish is at the set core
temperature, an acoustic signal sounds
for 2 minutes and the value of the core
temperature and flash. The
appliance deactivates.
9. Touch a sensor field to deactivate the
acoustic signal.
10. Remove the core temperature sensor
from the socket and remove the dish
from the appliance.
WARNING!
There is a risk of burns as
the core temperature sensor
becomes hot. Be careful
when you unplug it and
remove it from the dish.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support .
Baking tray/ Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
www.electrolux.com18