Important Safer These warnings are provided in the interest of safety. You MUST read them carefully before Installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these WARNINGS, contact the Customer Care Department. installation « The oven must be installed according to the instructions supplied. Any electrical work must be undertaken by a qualified electrician/competent person. « This oven is heavy and care must be taken when moving it.
Steam and high-pressure cleaning units are not suitable for cleaning because of the requirements of electrical safety. Always switch off at the electrical supply prior to carrying out any cleaning or maintenance work. Service You must not attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local ELECTROLYTE Service Force Center. Always insist on gentling ELECTROLYTE spare parts.
Table of Contents FOR THE USER Important Safety Instructions BEFORE THE FIRST USE 7 THE COUNTDOWN (MINUTE MINDER) . 8 OVEN CONTROLS 9 The function selector 9 The temperature control .. .8 The neon indicator lights .. 8 THEORETICIAN 10 Oven accessories 11 The cooking levels T THE DIFFERENT COOKING SETTINGS 12 COOKING FUNCTIONS 13 Fan oven 13 Grill 15 HINTS FOR SUCCESSFUL COOKING ..
Control panel with minute minder, function selector and temperature control Full glass door with maximum visibility Control panel A Electrocute countdown @ Function selector @ oven on indicator fight @ Temperature indicator light ® Temperature control
Remove all packaging, both inside and outside the oven, before using the appliance, First cleaning Remove the accessories and wash in warm and soapy water, Then rinse and dry carefully. First heating up A In order to remove possible production remnants, clean the appliance and heat up the oven without food once prior to first use. Ensure that the room is well-ventilated, How to proceed ? . Remove all accessories from the oven. * Remove any labels and protective foils from the front of the oven.
This minute minder stops the oven automatically and an audible signal sounds when the time selected at the beginning of cooking has elapsed (maximum 120 minutes). 5 How to proceed ? » Countersignature control and function selector to the desired position depending upon the cooking required. + Tums the countdown control knob clockwise to indicate the cooking time. * At the end of cooking, return the countdown control knob to manual position \“j and set the temperature control and function selector fo the Off
The function selector To obtain the desired cooking mode, turn the function selector ¢ + Oven light + Fan oven + Gil @ Once a function has been selected, an appropriate temperature must be set for the oven to heat up. To stop the oven turn the temperature control to g and then the function selector to 0. The oven light comes on as soon as the function selector is muted. The light remains on during cooking. The temperature control The temperature Is selected by furring the temperature control knob clockwise.
Oven accessories A In addition to the accessories supplied with your oven, use only ovenware that is ovenproof to very high temperatures (follow manufacturers’ instructions}. Your oven is equipped with : + 2 anti-tip wire shelves » 1 grill pan The anti-tip wire shelves The wire shelves should be fitted with the forms towards the back of the oven and low side up. If not fitted correctly the safety stop mechanism will be affected. The grill pan The grit pan is supplied with 1 grid and 2 handles.
Turn the control either clockwise or anti-clockwise to select the cooking function. Fan oven The air inside the oven is heated by the element around the fan situated behind the back panel. The fan circulates hot air to maintain an even temperature inside the oven. Select any temperature between 50°C and 250°C. Grill @ For rifling meat, toasting or browning dishes.
Fan oven Dishes can be cooked on one or several levels using the fan oven. The circulation of hot air produces an even cooking temperature. Fan oven cooking is ideal for all types of dishes. The advantages of fan oven Faster preheating : * Ashe fan oven quickly reaches temperature, iris not usually necessary o preheat the oven although you may find that you need to allow an extra 5-7 minutes on cooking times.
Cooking the same type of food on two levels ‘Which accessories to use ? In most cases, use wire shelves on runners © and @. See cooking charts. Cooking different types of dishes on two levels The multi-level position makes it possible for you to cook a complete meal at once. guided by the following recommendations : = The various dishes should require similar temperatures. « Overall cooking time should be the longest cooking required.
™ rein Use the grill with the oven door closed to prevent damage to the control panel. Never leave the grill unattended when cooking. Preheat for 3 to 5 minutes. This cooking mode is ideal for cuts of meat (pork chops, which stay tender and juicy, for toasting or for browning toppings on prepared dishes, preferably hot {e.g. macaroni dishes). How to proceed ? Grilling * Prepare the food to be grilled.
Choice of ovenware The thickness, conductivity and color of ovenware affect the cooking resits. Ay Aluminum, earthenware, oven glassware and aluminum with a non-stick interior reduce cooking and underneath browning. These materials are recommended for light, soft textured cakes and roasts.
" Number | Level of Temperature Dish Fre | Function | ™700 ™ | poking | S 1 electorate Cook time (minutest heat | sectarian | ravels | (runner | Posit Ion o) ROASTING GUIDE MEAT 150 160 20 30 per 500 g and 20 30 over Boer 1 Lamb and mutton 1 160 180 20 30 per 500 g and 26 30 over Pork and veal 1 160 180 20 30 per 500 g and 10 20 over Ham 1 150 170 30 40 per 500 g and 30 40 aver Chicken 1 150 170 15 20 per 500 g and 20 over Turkey and Goose 1 150 170 15 20 per 500 then 10 min per 5009 Duck 1 150 170 20 30 pe
” Functor Number Love_ of Sheaf Temperature Dish et | sector W position selector Gook time (minutes) 2 [ tends [R—| 150160 20-30 Madeira 140 150 20 25 Foch fut 125-135 150 180 Christmas 1 1 1| 125-135 150 180 Ginger tread 150 a2 Meringues 1 3 A B-90 120 180 2 and |R—— | 80-90 120 180 Flapjacks 1 2063 | Pares | 150160 and [R—4| 150160 2030 Shortbread 1 2003 | P | 140 150 handed 140150 1545 Cooking guide with grilling Use the grill with the oven door closed and never leave unattended when cooking.
WANING AND No heating element must be switched on during the cleaning procedure. Make sure that the oven has cooled down in a way that one may get in ouch with interior pairs without any danger. Only the function selector may be switched on for vane lighting. Steam and high pressure cleaning units are not suitable for cleaning because of the requirements of electrical safety.
Ensure the oven is disconnected from the electrical supply before changing the boob. The 25 W ~ E14 (230/240 V) screw-in bulb is special “heat-resistant” bulb capable of withstanding temperatures up to 300°C. Replacement bulbs are available through your ioctl Service Center. The bulb is located at the back inner side of the oven and can be reached from inside the oven. To replace the bulb : 1. Unscrew the bulb protecting cap (turn anti-clockwise}. 2. Unscrew the bulb anti-clockwise. 3. Screw in a new bulb.
Please carry out the following checks on your appliance before calling a service Engineer. it may be that the problem is a simple one, which you can solve yourself without the expense of a service call. A if the oven shows any sign of a fault, we recommend you do not use it. Disconnect the oven from the mains or remove the fuse on the appropriate circuit. PROBLEM POSSIBLE CAUSES WHAT The oven does not work. The oven is not wired in or switched on at the wall. There is a power failure.
1 you require an engineer or wish to purchase spare parts, contact your local ELECTROLYTE Service Force Center by telephoning : 0880 929929 Your call will be routed to the Service Center covering your post code area. Addresses of ELECTROLYTE Service Force Centers can be found on the pages headed ELECTROLYTE SERVICE FORCE. When you contact Service Force they will need the following information : 1. Your name, address and post code, 2. Your telephone number, 3. Clear and concise details of the fault, 4.
ELECTROLYTE GUARANTEE CONDITIONS We, ELECTROLYTE, undertake that if, within 12 months of the date of purchase, this ELECTROLYTE appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labor, materials or carriage on condition that : The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
See rating plate 230/ 240 V 50 Hz Required protection fuse thenceforth Amps Oven ratings Electric Maximum electrical power . . 3000 W/ 3200W Oven power 2400 W (230 V) GRIN Electric Overpowering .. e 2000 W (230 V) Oven lighting i, 25 W@V i Clean enamel (manual) Aperture dimensions of the oven Height o .. 580 mm Width Internal volume e 511 Optional extra available from Service Force Centers As an additional safety feature a cool door kit is available as an optional extra.
Fitting the oven into an “in column” or “under counter” cabinet Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown. Building~In : This appliance is classed as a type Y in terms of protection against overheating of surround areas.
Electrical connections A Connecting the appliance to the electricity supply must be carried out by qualified professionals only. The oven must be earthed in accordance with current regulations {Earth = yellow and green).
Choice of electrical connections There are two possible ways to connect your cooker, please choose from the most appropriate after reading the descriptions : « iris recommended that this appliance is wired with suitably rated cable {min 13 A}, into fixed wiring using a double pole isolation with at least 3 mm contact separation in all poles and neutral, located within 2 m of the appliance. If this fixed wiring circuit is only supplying the cooker, thane fuse circuit breaker) should be incorporated.
by connecting the cooker point to the hob and then connecting the hob to the oven. Provided that the hob manufacturer permits i, connect the oven to the hob and the hob to the cooker point using the same cabling as described above. Check the hob terminal block is large enough to take two cables and is of suitable rating. See Fig. 2. NOTE : 13 amp cable is not suitable for connecting this application. Control Panel Hob o Oven Fig.