User manual

Table Of Contents
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water.
3. Shake the strip to remove the excess
of the water.
4. Wait 1 minute and check the water
hardness with the table below.
The colours of the reaction zones
continue to change. Do not check the
water hardness later than 1 minute
after test.
5. Set the water hardness: menu: Basic
Settings.
Test strip Water hardness
1
Test strip Water hardness
2
3
4
You can change the water hardness in
the menu: Basic Settings / Water
hardness.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Navigating the menus
1. Turn on the oven.
2. Press or to select the menu
option.
3. Press to move to the submenu or
accept the setting.
At each point you can go
back to the main menu with
.
6.2 The menus in overview
Main menu
Symbol / Menu
item
Application
Heating Func‐
tions
Contains a list of
heating functions.
Recipes
Contains a list of au‐
tomatic programmes.
Symbol / Menu
item
Application
Favourites
Contains a list of fa‐
vourite cooking pro‐
grammes created by
the user.
Cleaning
Contains a list of
cleaning pro‐
grammes.
Basic Settings
Used to set the appli‐
ance configuration.
Specials
Contains a list of ad‐
ditional heating func‐
tions.
ENGLISH 11