User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. BEFORE FIRST USE
- 6. DAILY USE
- 7. CLOCK FUNCTIONS
- 8. AUTOMATIC PROGRAMMES
- 9. USING THE ACCESSORIES
- 10. ADDITIONAL FUNCTIONS
- 11. HINTS AND TIPS
- 11.1 Cooking recommendations
- 11.2 Advice for special heating functions of the oven
- 11.3 Full Steam
- 11.4 Turbo Grilling and Full Steam combined
- 11.5 Humidity High
- 11.6 Humidity Low
- 11.7 Steam Regenerating
- 11.8 Baking
- 11.9 Tips on baking
- 11.10 Baking on one level
- 11.11 Bakes and gratins
- 11.12 Moist Fan Baking
- 11.13 Multilevel Baking
- 11.14 Crispy baking with Pizza Setting
- 11.15 Roasting
- 11.16 Roasting
- 11.17 Grill
- 11.18 Frozen Foods
- 11.19 Slow Cooking
- 11.20 Preserving
- 11.21 Drying
- 11.22 Bread Baking
- 11.23 Food Sensor table
- 11.24 Information for test institutes
- 11.25 Information for test institutes
- 12. CARE AND CLEANING
- 12.1 Notes on cleaning
- 12.2 Recommended cleaning products
- 12.3 Removing the shelf supports
- 12.4 Steam Cleaning
- 12.5 Cleaning Reminder
- 12.6 Steam generation system - Descaling
- 12.7 Descaling reminder
- 12.8 Steam generation system - Rinsing
- 12.9 Tank Emptying
- 12.10 Removing and installing the door
- 12.11 Replacing the lamp
- 13. TROUBLESHOOTING
- 14. ENERGY EFFICIENCY
Problem Possible cause Remedy
There is no good perform‐
ance of the cleaning proce‐
dure.
The initial oven cavity tem‐
perature of the steam
cleaning function was too
high.
Repeat the cycle. Run the
cycle when the appliance
is cold.
There is no good perform‐
ance of the cleaning proce‐
dure.
You did not remove the
side grids before the start
of the cleaning procedure.
They can transfer heat to
the walls and decrease the
performance.
Remove the side grids
from the appliance and re‐
peat the function.
There is no good perform‐
ance of the cleaning proce‐
dure.
You did not remove the ac‐
cessories from the appli‐
ance before the start of the
cleaning procedure. They
can compromise the steam
cycle and decrease the
performance.
Remove the accessories
from the appliance and re‐
peat the function.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
14. ENERGY EFFICIENCY
14.1 Product Fiche and information according to EU 65-66/2014
Supplier's name Electrolux
Model identification
EOB8S31X
EOB8S31Z
KOBBS31X
Energy Efficiency Index 81.0
Energy efficiency class A+
ENGLISH 51