User manual

Removal and Installation of the runners

Foreasiercleaningyoumayremovetheentireshelving

parts from the oven inside.

For this purpose grip the oven runners in the middle,

draw off towards the oven center and remove from the

oven, lift slightly, if need be.

Hang in again: Insert the clevis hook and firmly press

down.

Fold down top heat element

For easier cleaning the heating elements under the

oven ceiling can be folded down at a slant.

Laybothyourthumbstotheleftand rightontheoutside

oven frame, then grip with your fingers in the front

bends of the heating elements and draw them off their

fixture to the front. The heating elements can now be

lowered at a slant and you can clean the oven ceiling.

After cleaning move the elements up again, draw in

again with fingers and thumbs and catch into the fix-

ture.

Appliances with stainless steel surface

During the cleaning procedure make sure that

the stainless steel surface finish (the fine hori-

zontal lines) will not be processed against the

structure.

For the stainless steel front side we recommend

throughout and regular cleaning and care withsuitable

stainless steel cleaners and preservative agents.

Please observe manufacturer‘s instructions. Scratch-

ing and scouring agents are not suitable.

Before wiping put the cleaner on a wet cloth and after-

wards wash off with water and dry with a clean cloth.

Control panel and oven door

Do please pay attention to clean sealing surfa-

ces at the door and in the door frame.

Thecontrolpanelandtheovendoorhavetobecleaned

with warm washing--up liquid or glass cleansing agent

andto bewiped dry.For cleaning the insideof the oven

door use only washing--up water.