User manual

2
5
I
n
s
t
a
l
l
a
t
i
o
n
i
n
s
t
r
u
c
t
i
o
n
s
The appliance must exclusively be con-
nected to the mains by an expert electrician.
With the installation and in case of a service fai-
lure the appliance has to be isolated from the
mains. Fuselage to be switched off or removed.
The general rules for the operation of electric
appliances, the provisions by the competent
electricity supply board and the specificationsof
these instructions for installation have to be
strictly adhered to.
Unpacking
Please do check whether the appliance was delivered
in perfect state. Appliances with obvious transport
damages must not be connected to the mains.
Disposal
All packaging parts are recyclable, wooden
strips are non--treated, foils and hard foam
parts marked. Packaging material and old
appliances to be disposed orderly.
Do please adhere to the national and regional
prescriptions (material separation, waste col-
lection, residuary product yards).
Installation in kitchen furniture
Electricalsafety isto beensured byprofessional
installation.
Protection against accidental contact according
to the regulations set by VDE or other local
authorities must be ensured by correct installa-
tion of the appliances. The same refers to the
back of the appliance which, even in case of
built--insolutionsawayfromthewall,mustnotbe
freely accessible.
Built--incupboardshavetobelocatedandfaste-
ned in a way that they are stable.
Built--in dimensions
The opening in the cupboard must correspond tocom-
mercialdimensions. Thehints required aregiven in the
following dimension sketch.
Built--in cupboards have to be located and fastened in
a way that they are stable.
592
594
547
522 / 540
567
20
579
560--568
560-600
Einbauschrank
600 mm