User manual

Prior to the first use

Daytime setting

When the oven has been connected to the mains and

afterfailure ofelectricity,the timedisplay oftheelectro-

nic autotimer flashes 0.00 and AUTO. The present

daytimehas to beset. Without this, theoven cannot be

used. The time display covers the range from 0.01 to

24.00 hours.

. Pushbuttons and simultaneouslyand

hold it.

. Ata time setthe present daytime bypushing

button forwards or button backwards.

To make corrections of time (summer--/winter--time,

etc.) simultaneously press the two adjusting buttons

and adjust the actual time with or .

First cleaning

In order to remove possible production remnants,

clean the appliance once prior to first use.

Remove any possibly existing labels and protective

foils from the front of the appliance.

Clean control panel and oven door with hot water and

a washing-up liquid and dry.

Remove the accessories from the oven and wash

them.

The clean-enammelled cavity has to be washedo with

warm water and a washing-up liquid. Then dry it.

The oven lighting may be switched on for this purpose

by setting the function switch to position .

First heating up

Prior to first use the oven must be heated up

once.Takecareforasufficientspaceventilation.

Setfunction switchto top/ bottom heat andtemperatu-

re selector knob to 250

Holding this setting, operate the empty and closed

oven for 60 minutes.

250

STOP